Size : DN3-DN3000mm (1/8”~120”)
Accuracy : ±0.5% of reading,velocity >0.3 m/s
Velocity : 0.1-15 m/s
Signal Output : 4~20 mA, pulse HART
Power Supply : AC85~250V, DC20V~36V
Sizes : M-5®, M-7®, M-10®, M-15®, M-25®, M-30®, M-40®, M-60®, M-80®
Max Capacity : 800 GPM / 3,028 LPM (180 M3/hr)
Max Pressure : 150 PSI / 10.3 Bar / 1034 kPa
Max Viscosity : 30-1,500,000 SSU, or 1cP to 325,000cP
Temperature Range : -40°F to 160°F
Linearity : 0.5%
Repeatability : 0.2%
Accuracy : ±1% of reading at rates>0.2 mps
Response Time : 0-999 seconds, user-configurable
Velocity : ±32 m/s
Pipe Size : 20mm-6000mm
Size & Process Connection : DN4, 6, 10, 15, 20, 25, 32, 40; Thread connection, DN15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 200, Flange connection
Accuracy/Range ratio : ±0.5%R; 1:10; 1:15; 1:20
Sensor Material : SS304, SS316(L)
Output : Pulse ,4-20mA, HART
Power Supply : A: +24VDC, for 4-20mA , pulse, RS485 output
B: 3.6 V lithium battery, battery voltage: 2.0 V ~3.0 V
Fluids Measured : Steam, Gases, and Liquids
Flow Range : 10:1 turndown
Accuracy : ±1.0% & ±1.5% &± 2.5%
Max. Process Temperature : 150℃ - 350℃
Nominal Operating Pressure : DN15{aspcms:sitetitle}.DN50:4.0Mpa, DN65{aspcms:sitetitle}.DN200:1.6Mpa
Max. Pressure Rating : DN15:32Mpa; DN25:25Mpa;DN50:20Mpa, DN80:10Mpa;DN100:6.4Mpa, DN125{aspcms:sitetitle}.DN150:4.0Mpa
Fluids Measured : Steam, Gases, and Liquids
Flow Range : 30:1 turndown
Liquids : 1.0 ft/s (0.3 m/s) Velocity Min. 30 ft/s (9.14 m/s) Velocity Max
Digital Communications : HART, Modbus, Profibus DP, Foundation Fieldbus, BACnet, USB, RS-232 Hazardous
Area Approvals : CE, cFMus, ATEX, PED, IECEx
Medium : Gas (except acetylene)
Pipe Range : DN100-DN4000, DN10-DN2000
Velocity : 0.1~120 Nm/s
Accuracy : ±1% , ±2.5%
Working Temperature : -40℃~+220℃
Working Pressure : ≤2.5 MPa, ≤4.0 MPa
Max.flow rate : 200kg/min
Wetted parts : Stainless steel 316L
Sensor housing : Stainless steel 304
Fluid temperature : -200~200°C
Temp. Accuracy : ±1°C
Operating Voltage : AC85~265V,DC24V
Type : Welding Neck & Slip - On
Facing : Raised Face & Ring Joint
Size : 1” to 30"
Material : A | S | 304 SS / 316 SS / 316L SS / Monel 400 / Hastelloy
Pressure Taps : 2 (Standard)
Size : 1/2”, 3/4” (ANSI 300-600, 900,1500, 2500)
It has come to our notice that certain unscrupulous persons are falsely claiming to be representing / PI Controls Instruments Private Limited (our Company) and are posting false information by offering dealerships and other services on the Company’s behalf. Please note that we have never authorized any person or company to offer dealerships in our name.
PI Controls Instruments Private Limited is the Sole Owner of Trademark, . There is not any subsidiary anywhere in the world.
The aforesaid wrongful use of our name/trademarks/fake materials violates our rights, and we disclaim all liabilities arising out of such dealings.
Members of the public and the trade are hereby cautioned against dealing with such unscrupulous persons and are requested to bring to our notice (at the below address) such wrongful activities to enable us to institute appropriate legal proceedings, both civil and criminal, to curb such activities. Please note that the correct website /domain name of the Company is https://www.picontrols.co.in and we would recommend checking the authenticity of each claim at the below contact details.
We endeavors to ensure that the data and other material in this section are correct and complete but does not accept liability for any error made or omission from this section.
We shall not be liable for any claims or losses of any nature, arising indirectly or directly from use of the data or material on this section or unauthorized access to this section or otherwise howsoever arising (except to the extent required by law).
1) Our officials do not communicate via generic email addresses such as Hotmail, Yahoo. All communications will always originate from a verifiable https://www.picontrols.co.in e-mail address (domains of @ picontrols.co.in) and not from any free web-based email accounts.
2) Fraudsters usually request targets to keep business proposals, etc confidential.
3) Fraudsters usually communicate only via email and telephone with a reluctance or a refusal to meet in person.
4) Conduct general searches (Google or https://www.picontrols.co.in Official website) to verify the details provided in false letters and communications.
You should consider reporting the incident to your local law enforcement.